McNally Electronics Boost/EGT Auto Gauge Combo Kit
McNally Electronics Boost/EGT Gauges are essential for any vehicle that is running a turbo or a super charger. Our boost/egt auto gauge allows you to closely monitor your vehicle’s boost and/or exhaust gas temperature. An exhaust gas temperature gauge (EGT gauge) is used to monitor the exhaust gas temperature of an internal combustion engine in conjunction with a thermocouple-type pyrometer. By monitoring EGT, you can get an idea of the vehicle's air-fuel ratio. At a stoichiometric air-fuel ratio (AFR), the exhaust gas temperature is different from that in a lean or rich air-fuel ratio. At rich air-fuel ratio, the exhaust gas temperature either increases or decreases depending on the fuel. High temperatures (typically above 1,600 °F or 900 °C) can be an indicator of dangerous conditions that can lead to catastrophic engine failure. A McNally Electronics Boost/EGT Gauge will allow you to prevent engine failure by monitoring the EGT of the engine.
McNally Electronics offers Boost/EGT gauges that is electronically driven as well as having a variety of options to choose from. Our Boost/EGT gauges gives you many options of boost gauges and diesel boost gauges to select from to fit the look at need of your vehicle. Our Boost/EGT gauge combo kit is a complete kit that includes all cables and sensors. Our Boost/EGT Gauges are a highly tuned instrument that is hand assembled on site with high quality and will measure your boost pressure with an external pressure sensor and exhaust gas temperature with a type K thermocouple. The temperature range in the digital window goes from 0 to 1600 deg Fahrenheit or 0-871.1111 deg Celsius. You can select with the press of a button Fahrenheit or Celsius. the McNally Electronics Boost/EGT gauge includes wire harness, pressure sensor, thermocouple and compression fitting. You can select Red, Green, Blue, Yellow or White LED options with all of our gauge combo kits. This complete auto gauge kit includes ALL cables and sensors. McNally Electronics Auto Gauges includes all sensors, mounting hardware, installation instructions, free lifetime technical support and a one year limited warranty with each turbo boost gauge purchased.
Boost and Exhaust Gas Temperature Combo Gauge
- McNally Electronics Gauges come with 6' of wire for left handed drive vehicles and 0-30 psi on the Boost measurement.
- 2 1/16 Inch (52mm) Black Face Gauge with a Low Profile Lens
- Boost Reading from 0PSI to 30PSI
- EGT Reading from 0 to 1600 Degrees Fahrenheit
- Electronic Boost Pressure Sensor
- Type K Thermocouple Probe with 1/8th NPT Male Threads
- Thermocouple Probe Includes 6 Feet of Steel Braided Cable
- One Year Limited Warranty
The McNally Electronics gauges all have a needle with a 240 degree sweep and digital display. Since McNally Electronics gauges are all electronic, they can be configured to read two different parameters like Turbo Boost and Exhaust Gas Temperature or Oil Pressure and Temperature at the same time. The gauges read pressure with an external pressure sensor and read temperature with a Type K thermocouple. We have dial faces the show pressure in PSI or BAR or kPa. The temperature is usually displayed on the digital display, and the use can select Fahrenheit or Celsius on the front panel with the press of a button. A typical kit like the Boost EGT kit comes with: Gauge and power cable, pinned pressure sensor, a pinned Thermocouple and compression fitting.